Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 19.06.2025 04:11

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

In schematic diagrams this is the symbol for a fuse:

eight

This moon in the solar system continues to surprise scientists with the discovery of alternating water forms on its surface. - Farmingdale Observer

so, what happens?

nine

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Is there anything you did that you regret? If so, what is it, and why?

There are two important concepts here.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Donald Trump's family launches 'Made in America' T1 smartphone. Here's what it offers - Mint

the problem then depends on "how fast does the fuse operate?".

A fuse is a non-resetable over current circuit protector.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The Witcher 4 is built for console first, CDPR confirms 60FPS is not guaranteed - TweakTown

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Here is a simplified AC power diagram.

Methane-eating sea spiders discovered off Southern California coast - SFGATE

One

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

What are some ways to identify and avoid logical fallacies, such as straw man and red herring, in an argument?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

These devices are installed between the “hot” and “neutral” and protective ground.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

I supercharged Google search with a three-key shortcut with custom results - Android Police

The third is lightning and “how it gets conducted into a home.”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

What is your favourite true story to tell at a party?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

He then describes Rainy Season and Lightning.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

How was your first cuckolding experience as a husband?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

One is “what exactly is in a ‘surge protector’ ? ”

Because the load is inductive, the current lags the voltage.(by a bit).

How do I seduce my sister? (I am an Indian) I want to have sex with her.?

What does a fuse do?

First Sentence:

(Dc diagram shown, AC is similar).

Are you happy with your life?

This is where this question deviates from being a 'generic' question, and becomes more specific.

[image of Common-mode choke]

a photo is worth a thousand words.

Why do you think Democrat favorability ratings are so low?

For this case there are devices called Metal oxide varistors (MOV).

There are three different concepts here that are getting confused.

[old diagram got deleted by accident]

What do feminists mean when they say they want to ‘normalize’ menstruation and its discussion?

This is where the MOV conducts again, and dissipated the energy.

The MOV will conduct when the voltage exceeds 50% of line voltage.

what exactly is a ‘surge’ protector?

Why doesn't speeding significantly decrease one’s commute time? I've done a lot of road trips and driving and have experimented by increasing speed by 10–20%, but somehow this never equates to arriving 20% sooner, even on clear roads.

2024–10–16 [ OO OLAOYE OYEBODE ]

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Edit 2024–10.

Why do people smoke?

Upvotes:

So, the voltage could go up to 500 volts, and the fuse will not open up.

I post the exact comment here.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

The bolt then partially travels down the line to your home.

An AC voltage/ current source, and an ac inductive load.

It also is a device that limits the change in current flow.

2024–10–10[John johnson John Johnson ]

But it can get overloaded, and no longer works.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Now when you have a certain ac resistance, then a current flows in a loop.

The other is “what does a “fuse” do?”

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

It seems Mohan does not understand the difference between a comment and an Answer.

but this device (an Inductor) … impedes the rapid changes in the current.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

A circuit breaker is similar, but is resettable.

Barnstars:

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

He then describes the function of a fuse.

This is 'the assistant's answer'

This device then solves the entire problem.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

but I think this circuit , shows a few more pieces.

At one ohm, the resistor has a maximum of 1 watt power.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

He then asserts :

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This one hit behind the barn.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

At least they know the answer if they wanted it.

What is lightning?

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

But… the neutral is now “floating” because of the 1 ohm resistance.